ElectronicsShop
Jump to navigation
Jump to search
Partial inventory of electronics shop supplies
- 555 timers like 100 of them and some 556 dual timer variety.
- Voltage regulators all varieties, adjustable, 3.3v, 5v, 12v, etc,
- Resistors, millions of resistors, MILLIONS I TELL YOU!! All brand spanking new.
- Capacitors, millions of those too. Under the shelf by to the right of the soldering station there is a whole big box with jars full of ceramic caps in them if the ones in the little draws are not enough.
- Logic IC's, AND, OR, NOR, inverter, counters, latches, tons of that kinda stuff if you like.
- Lots of micro controller chips like PIC16C65 and tons of other variations with many pins or just a few pins. I also saw a bunch of ATMEL ATMEGA marked chips.
- Vacuum tubes, you know, those things with nothing inside.
- Transistors of all types and sizes and such. A fair amount of the old can style if you want to make your project retro vintage steam punk style. Some nice power MOSFETs too.
- Diodes, including zener, rectifier, bridge rectifier, fast recovery, signal, oh and lots of LEDs too.
- Incandescent light bulbs, mostly small and low voltage. Some neon lamps and indicators. Also a bunch of green neon lamps which are kinda cool and rare.
- Tons of sockets, plugs, headers, pins, terminal strips, serial port plugs, mitty, audio, and all kinds of stuff like that to make your own custom cords.
- Copper clad boards. To the right of the solder station against the white board there is a flat box with huge about 2 foot by 1 foot double sided copper clad boards. Make awesome printed circuit boards!!
- Relays, 5 volt, 12 volt, solid state, big ones, small ones, etc.
- Switches, lot of switches. Toggle, push button, soft ones, tactile ones, lighted ones.
- Pots, no not drugs silly... potentiometers, multi turn, single turn, 10k, 20k, trimmer, etc.
- Metal and plastic nuts, bolts, and lots of standoffs and hardware.
- And lot of other cool stuff for YOUR projects.